Brother DSmobile 600 Driver & Scanner Downloads
Brother DSmobile 600 Driver & Software Macintosh, Linux, Windows 10, 8, 8.1, 7, Xp, Vista 64-bit 32-bit – Brother DSmobile 600 takes cellular scanning into the next degree. It weighs only a mere 320g. Regardless of the low cost, it seems strong enough for life on the street, and it is sensible, too, powered with one USB interface (other cellular scanners, like Plustek’s expensive MobileOffice D412, require a second to offer extra electricity ).
Mobile employees who desire a mobile scanner will locate the Brother DSmobile 600 fits the bill well. It is excellent price, simple to use and performs superbly for such a very small scanner.
Brother DSmobile 600 Toner Reset
- You have to check that your printer is on.
- After that, look at the toner cartridges by opening the printer lid.
- Continue by pressing and holding the Asterisk key within 5 seconds.
- Next, see the LCD. A new menu should appear.
- Choose the cartridge that you want to reset, K = Black, C = Cyan, M = Magenta, Y = Yellow
- STD = Standard Capacity Cartridge, HC = High Capacity Cartridge, SHC = Super High Capacity Cartridge.
- You will see the word “Reset?” on your screen. Therefore, you should choose “Yes”
- You can close the printer lid.
Brother DSmobile 600 Drum Reset
- You have installed the new drum unit. Therefore, you have to reset your printer first.
- Hit “X” so you want to clear any error message.
- Hit the tools button (image of a spanner).
- After that, select “All Settings”.
- Then, choose “Machine Info”.
- Next, press “Parts Life”.
- Continue by pressing “#”. You will see the touchscreen menu changes.
- Here, you will see that the color drum has been replaced.
- Lastly, choose “Yes”
Brother DSmobile 600 Wireless Setup
- First, hit the menu button on your machine
- Then, use the bottom up button to find network menu. And then, hit ok
- After that, choose factory reset, and then hit ok
- Next, select number 1 (If your printer has fax button. Otherwise, follow the instruction on the screen)
- Your printer is going to reset the network automatically
- Then, you should do wizard setup to activate the wireless
- Continue by pressing the menu button by using the bottom-up button to find “network” and ok.
- Choose “WLAN”. Then, press ok
- Select “setup wizard”, and then wait for a moment. Your machine is searching for the SSID. Once this process is done, hit back
- After completing the steps, the Wi-Fi icon will appear at the top of the screen.
- Insert the CD driver.
- Select the language.
- Next, choose the “initial installation” menu
- Then, select “install MFL-Pro Suite”
- Select yes and wait for a moment.
- After that, continue by choosing wireless network connection. Then, choose next.
- Check all the options and choose next.
- If your Wi-Fi has detected the printer, choose the printer and select next until a pop-up message shows and instructs you to re-start your device.
- On the other hands, if your Wi-Fi does not detect it, choose the second option that identifies your machine by address.
- Fill your IP address in your computer on the blank column.
- Here, you can check the IP address in your computer: choose menu > network> Wlan> TCP/IP> IP address.
- If you have completed the process, your computer will process it immediately until you get a message “Brother Registration”. After that, choose next and restart your computer.
- On your PC/ network, search for Wireless Network Connection
- After that, choose “SETUP” in the option. Choose the wireless network and select Connect
- Next, choose “Connect Anyway” and wait for a moment until you see that your wireless is connected.
Installation Brother DSmobile 600 Software For Windows
- First, download the driver and choose the type of system operations on your computer.
- Then, double-click to the downloaded file.
- Next, click Unzip.
- Open the folder.
- After that, double-click to D_SETUP.exe to start the installation.
- Then, follow the instructions on the screen to complete the installation.
- If the installation is complete, restart your computer and test your printer.
Installation Brother DSmobile 600 Software For Mac
- First, download the driver and select the operating system of your computer
- Then, double click to the downloaded “xxxxxxxx.dmg”.
- After that, double click to the installer package xxxxxxxx.pkg.
- After that, follow the instructions on your screen to complete the installation process
- Once the installation is complete, restart your computer and test your printer.